Most cutting lathe tools used in industry use some type of cemented carbide as the base material. We need to use different shapes of cutting lathe tools according to different requirements of different products. The high-speed steel single-point cutting lathe tools used in the industry, regardless of the shape of the single-point cutting lathe tool, it must have the correct back angle and front angle to be correct cutting.
The lathe tool in Figure A.
Which is used to turn to the half shoulder. The lathe tool has a square side cutting edge angle, which can directly guide the cutting force backwards, which is opposite to the cutting direction. If there is enough material behind the cutting edge, it can be used for roughing.
The lathe tool in Figure B.
Which is a standard turning lathe tool with a lead angle. The lead angle can be roughed. You can also rotate the lathe tool to complete the half-square shoulder.
The turning lathe tool in Figure C .
Which has a very large nose radius. Larger tip radius can achieve fine finish when cutting lightly or heavily. The lathe tool can also be used for varying radii to form corner radii.
The nose of the lathe tool in Figure D.
Which is in front of the side cutting edge. At this position, the lathe tool is set to shallow finish on the diameter and end face of the shoulder.
The lathe tool in Figure E.
Which is a form lathe tool. The form that is ground into the lathe tool is reproduced on the part.
The lathe tool in Figure F.
Which is an end lathe tool. The lathe tool can be used to face the end of the workpiece clamped in the semi-center. The center of the half is a solid center of the tailstock, and half of the tip of the blade is worn away for cleaning.
The lathe tool in Figure G.
Which is called an undercut or grooving lathe tool. As shown, it is used to cut grooves. If there is proper clearance, the lathe tool can be inserted or cut into the left or right side.
The lathe tool in Figure H.
Which is a cutting lathe tool or a separating lathe tool. This lathe tool is used to cut the workpiece to the final length when fixing the part in the chuck. The cutting lathe tool uses pre-made blades and knife holders.
The lathe tool in Figure I.
Which is a 60-degree threading lathe tool. The threading lathe tool is another type of form lathe tool.
More information please click https://www.desheng-precision.com
